SOLAR WATER HEATERS SERIES CS 120 – 300 with double enameled tank
Technical characteristics – CS series
| Tank’s outer protection |
Aluminum made, overn painted with electrostatic painting type Seaside Glass |
| Colour |
RAL9006 |
| Inner tank |
made by low carbon steel, 3mm thick, protected with double layer of enamel at 860°C according to standard DIN 4753 |
| Jacket (heat exchanger) |
made by the same material,1.5mm thick |
| Tank’s insulation |
made by CFC free expanded P.U. [52kgr/m³] of 50mm thickness |
| Cathodic protection |
with magnesium rod, ∅22mm L = 500mm |
| Electrical back-up |
with electric element of power between 1,5 up to 4 kW (according to local regulations) with safety thermostat |
| Coil exchanger PLUS |
under request a specific coil for burner or heat pump connection for taking advantage of the existing source of energy |
| Special difusor ENERGON |
enhances the tank’s perfomance for up to 30% |
| Collector profile |
made from specific aluminum alloy (Al Mg Si 0.5) oven painted with electrostatic painting Seeside Class |
| Titanium selective absorber |
welded on to the grilled pipes with laser |
| Absorption coefficient |
α ≥ 0.95 ± 0.02 |
| Emmission coefficient |
ε ≤ 0.05 ± 0.02 |
| Glass cover |
4mm thick with trassmissivity coefficient τ ≥ 0.90 low iron type |
| Support base |
Universal for angles of 0 and 45 degrees, made from aluminum |
| Collector side covers |
from aluminum that cover the connection hoses, giving more aesthetic |
